L3214 Laser Cutter
User’s Manual
Laser cutting system components
26
2.2.3.4
Edge detection sensor
The edge detection sensor detects the edge of your material and triggers lateral movement of
the unwinder carriage (with the roll of material) to ensure the material stays within the width
of the conveyor.
NOTE
: The edge detection sensors are not suitable to use in combination with
mesh material. Additional sensors and equipment must be fitted to the unwinder
if you need to use mesh material (or material with holes).
2.2.3.4.1
Repositioning the edge detection sensors
In some cases, you may need to reposition the edge detection sensors, for example if you
replace the roll of material with a smaller size and the edge of material therefore needs to be
detected elsewhere.
1.
Loosen the carriage by turning the knob.
2.
Move the edge detection sensors carriage.
