L3214 Laser Cutter
User’s Manual
Maintenance
34
4.1.1
Optical components
To
achieve maximum output from the laser cutter, the system’s optical components
must be
in good working order.
L
A
S
E
R
T
U
B
E
Y
A
R
M
+
R
A
IL
REAR X RAIL
FRONT X RAIL
L
A
S
E
R
C
A
B
IN
E
T
C
O
N
T
R
O
L
C
A
B
IN
E
T
CUTTING AREA
CUTTING HEAD
P
O
IN
T
E
R
COMBINING MIRROR
STATIC MIRROR
TRAVELLING MIRROR
HEAD MIRROR
+ FOCUSING LENS
The optics must be handled with care and cleaned only with optical cleaning solution and an
optical grade polishing cloth. They must not be subjected to abrasives, etc. The working
surfaces must not be handled directly. Ideally, gloves or finger cots should be used to avoid
fingerprints on the surfaces. Optical cleaning equipment is supplied in the tool kit and further
supplies may be obtained from the distributor.
1
Gloves
2
IPA cleaning solution
3
2.5mm hexagonal hex key
4
4mm hexagonal hex key
5
Lens-cleaning cloth (lint-free)
NOTE
: After having cleaned all the optical components, check the laser beam
alignment.
1
2
3
4
5
