L3214 Laser Cutter
User’s Manual
Safety
11
1.1.5.2
Safety covers
When the safety cover lid of the cutting area or the conveyor safety cover is opened, the laser
stops firing and the cutting job is paused. A warning on the touch control panel pops up,
prompting the operator to close the cover. The machine will resume operation when the covers
have been closed.
1.1.6
Personal protective equipment
The required safety equipment depends on the material that needs to beis processed. When
operating or servicing the machine, the operator should wear appropriate protective
equipment. This can include:
•
Protective work clothing
•
Respirator mask, in case of toxic fumes
•
Safety goggles: when processing the material, harmful particles can be generated.
1.2
Operating environment
Environmental conditions can significantly affect the machine’s performance. Most
restrictions or recommendations for the ideal operating environment are already described in
the site preparation document. The environmental conditions of the machine (without media)
are as follows:
Operating Temperature
15 to 32
C
59 to 90
F
Storage temperature
-30 to 70
C
-22 to 158
F
Relative humidity
10 - 85 %, non-condensing
10 - 85 %, non-condensing
It is possible that the environmental conditions of the used media are stricter than those of
the machine itself. Please refer to the documentation about the used media. Also, make sure
that the media has had enough time to acclimatize.
