Subaru Impreza 2003, Service Manual

Page: 1052 / 3610

ME(H4DOTC)-78
MECHANICAL
CAMSHAFT
(4) Similarly, tighten cap on the exhaust side.
After tightening cap, ensure the camshaft ro-
tates only slightly while holding it at “base” circle.
Tightening torque:
T1: 10 N·m (1.0 kgf-m, 7 ft-lb)
T2: 20 N·m (2.0 kgf-m, 14.5 ft-lb)
3) Camshaft oil seal installation:
Apply grease to new oil seal lips and press onto
front end of camshaft by using ST1 and ST2.
NOTE:
Use a new oil seal.
ST1
499587600 OIL SEAL GUIDE
ST2 499597200 OIL SEAL GUIDE
4) Rocker cover installation:
(1) Install the gasket on rocker cover.
Install the peripheral gasket and ignition coil
gasket.
(2) Apply fluid packing to four front open edges
of peripheral gasket.
Fluid packing:
Part No. 004403007
THREE BOND 1215 or equivalent
(3) Install the rocker cover on cylinder head.
Ensure the gasket is properly positioned during
installation.
5) Install the oil pipe.
Tightening torque:
30 N·m (3.1 kgf-m, 22.1 ft-lb)
6) Connect the variable valve timing solenoid valve
connector.
ME-00717
(B)
(A)
(E)
(F) (D)
(C)
T2
T1
ME-00116
ST1
ST2
ME-00759
RH
LH
ME-00712
ME-00711