Subaru Impreza 2003, Service Manual

Page: 2086 / 3610

CL-24
CLUTCH SYSTEM
FLYWHEEL
3. Flywheel
A: REMOVAL
1. 2.5 L MODEL
1) Remove the transmission assembly. <Ref. to
5MT-38, REMOVAL, Manual Transmission As-
sembly.>
2) Remove the clutch cover and clutch disc. <Ref.
to CL-20, REMOVAL, Clutch Disc and Cover.>
3) Remove the flywheel using ST1 and ST2.
ST1
498497100 CRANKSHAFT STOPPER
ST2 499057000 TORX PLUS
2. EXCEPT 2.5 L MODEL
1) Remove the transmission assembly. <Ref. to
5MT-38, REMOVAL, Manual Transmission As-
sembly.>
2) Remove the clutch cover and clutch disc. <Ref.
to CL-20, REMOVAL, Clutch Disc and Cover.>
3) Using the ST, remove the flywheel.
ST
498497100 CRANKSHAFT STOPPER
B: INSTALLATION
1. 2.5 L MODEL
1) Install the flywheel and ST.
ST
498497100 CRANKSHAFT STOPPER
2) Tighten the flywheel attaching bolts to the spec-
ified torque.
ST
499057000 TORX PLUS
NOTE:
Tighten the flywheel installing bolts gradually. Each
bolt should be tightened to the specified torque in a
crisscross fashion.
Tightening torque:
72 N·m (7.3 kgf-m, 52.8 ft-lb)
3) Install the clutch disc and cover. <Ref. to CL-20,
2.5 L MODEL, INSTALLATION, Clutch Disc and
Cover.>
4) Install the transmission assembly. <Ref. to 5MT-
41, INSTALLATION, Manual Transmission Assem-
bly.>
(A) Flywheel
(A) Flywheel
ST1
ST2
( A )
CL-00121
CL-00019
S T
( A )
ST
CL-00122
( 1 )
( 2 )
( 3 )
( 4 )
( 5 )
( 6 )
( 7 )
( 8 )
CL-00123