Subaru Impreza 2003, Service Manual

Page: 2678 / 3610

PS-54
POWER ASSISTED SYSTEM (POWER STEERING)
STEERING GEARBOX [RHD MODEL]
D: ASSEMBLY
1) Apply a coat of grease to inside and outside of
new oil seal.
Specified steering grease:
VALIANT GREASE M2 (Part No. 003608001)
2) Verify the oil seal direction and installation posi-
tion. Using the ST and press, press fit the oil seal to
gear box.
ST
34199AE130 GEARBOX OIL SEAL IN-
STALLER
3) Attach the steering body to ST as shown in the
figure. Apply a coat of grease to needle bearing.
ST
926200000 STAND
CAUTION:
Ensure the needle bearing is free from defects.
If it is faulty, replace the steering body with a
new one.
4) Using the ST·B and ST·C, attach the oil seal to
ST·A.
ST
927490000 INSTALLER A, B, C
NOTE:
Face the oil seal in direction shown in the figure.
5) Insert the ST·A with oil seal assembled, through
gear side of rack. Remove the oil seal from ST·A
near piston, and then remove the ST·A from rack.
6) Install the back-up washer from gear side of
rack.
(1) Oil seal
(1) Steering body
PS-00073
PS-00074
(A) Oil seal
(A) Oil seal
(B) Rack
(C) Piston
(1) Oil seal
(2) Back-up washer
(3) Rack
PS-00075
ST A
ST B
ST C
(A)
PS-00076
ST A
(A)
(B)
(C)
PS-00077