Subaru Impreza 2003, Service Manual

Page: 2939 / 3610

LI-11
LIGHTING SYSTEM
COMBINATION SWITCH (LIGHT)
10.Combination Switch (Light)
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the instrument panel lower cover. <Ref.
to EI-43, REMOVAL, Instrument Panel Assembly.>
3) Remove the screws which secure the upper col-
umn cover to lower column cover.
4) Disconnect the connector from combination
switch.
5) Remove the screws which secure the switch,
and then remove the switch.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Measure the combination switch resistance.
1. LIGHTING SWITCH
LHD model and RHD for Europe model:
RHD except for Europe model:
2. DIMMER AND PASSING SWITCH
LHD model and RHD for Europe model:
RHD except for Europe model:
LI-00009
LI-00068
(A) LHD model/RHD model (for Europe)
(B) RHD model (Except for Europe)
Switch position Terminal No. Standard
OFF — More than 1 M
Ω
Tail 14 and 16 Less than 1
Ω
Head 13, 14 and 16 Less than 1
Ω
Switch position Terminal No. Standard
OFF — More than 1 M
Ω
Tail 9 and 15 Less than 1
Ω
Head 9, 14 and 15 Less than 1
Ω
Switch position Terminal No. Standard
Passing 7, 8 and 16 Less than 1
Ω
Low beam 16 and 17 Less than 1
Ω
High beam 7 and 16 Less than 1
Ω
Switch position Terminal No. Standard
Passing 1, 2 and 9 Less than 1
Ω
Low beam 9 and 10 Less than 1
Ω
High beam 2 and 9 Less than 1
Ω
LI-00184
1514131211 10 9 17 16
6 5 4 3 2 1 8 7
1514131211 10 9 17 16
6 5 4 3 2 1 8 7
(A)
(B)