Subaru Impreza 2003, Service Manual

Page: 2930 / 3610

LI-2
LIGHTING SYSTEM
GENERAL DESCRIPTION
1. General Description
A: SPECIFICATIONS
B: PRECAUTIONS
• Before disassembling or reassembling parts, al-
ways disconnect the battery ground cable. When
replacing radio, control module, and other parts
provided with memory functions, record memory
contents before disconnecting the battery ground
cable. Otherwise, the memory will be erased.
• Reassemble in reverse order of disassembly, un-
less otherwise indicated.
• Adjust parts to the given specifications.
• Connect the connectors and hoses securely dur-
ing reassembly.
• After reassembly, make sure functional parts op-
erate smoothly.
WARNING:
• Airbag system wiring harness is routed near
electrical parts and switches. All airbag system
wiring harnesses and connectors are yellow.
Do not use electric test equipment on these cir-
cuits.
• Be careful not to damage the airbag system
wiring harness when servicing electrical parts
and switches.
C: PREPARATION TOOL
1. GENERAL TOOLS
Headlight 12 V — 55 W/60 W (Halogen)
Front turn signal light 12 V — 21 W
Side turn signal light 12 V — 5 W
Clearance/Parking light 12 V — 5 W
Front fog light 12 V — 55 W
Rear fog light 12 V — 21 W
Rear combination light
Sedan
Tail light 12 V — 5/21 W
Stop light 12 V — 21 W
Wagon Tail/Stop light 12 V — 5/21 W
Turn signal light 12 V — 21 W
Back-up light 12 V — 21 W
License plate light 12 V — 5 W
High-mounted stop light
Sedan
Standard type 12 V — 21 W
Rear spoiler built-in type 12 V — 1.2 W (LED)
Wagon 12 V — 10 W
Room light 12 V — 8 W
Spot light 12 V — 8 W
Luggage room light 12 V — 13 W
Trunk room light 12 V — 5 W
Glove box light 12 V — 1.4 W
TOOL NAME REMARKS
Circuit Tester Used for measuring resistance and voltage.