OnAir 500 Digital Mixing Console
Operating Elements 3-7
Date printed:
30.07.04
GAIN
[17]
When using EQ, the total amount of signal present on a channel can be radi-
cally changed. This can result in clipping, even if the original signal level
was ideal before EQ was applied. Clipping is indicated by the
OVL
LED on
the corresponding channel strip. The
GAIN
control can modify the digital
signal level by ±12 dB to compensate for signals that are either too soft or
too loud.
PAN / BAL
[18]
When a stereo source is routed to the stereo outputs using one or both of the
PROG
/
AUD
buttons [19], the
PAN/BAL
control will act as a
balance
control
adjusting the amount of signal sent to the left and right outputs of the se-
lected stereo bus.
If the selected channel is using a mono source, then the
PAN/BAL
control will
pan
the signal between the left and right outputs of the selected stereo bus.
PROG / AUD
[19]
Each button routes the selected channel to either the PROG or AUD output
bus. When routed, the corresponding legend will illuminate in the status win-
dow. The channel fader adjusts the level of the signal in that channel being
sent to the PROG and AUD output buses.
Summary of Contents for OnAir 500 Modulo
