Studer OnAir 500 Modulo, Operating Instructions Manual

Page: 55 / 118

OnAir 500 Digital Mixing Console
4-12 Menu Pages
Date printed: 10.08.05
4.8 Display Settings
Setting the Display Contrast: 1 Press the SETUP button found below the LC display. This will enter the setup
mode.
2 Use the PARAMETER encoder to scroll through the menu pages to locate the
Display Settings
menu page. The SETUP button will flash upon selec-
tion.
3 Press the SETUP button to enter the display settings set-up mode. The LC
display will show the current selection:
LCD Contrast:
50
4
Use the PARAMETER encoder to adjust the contrast of the LC display.
5 Pressing the SETUP button will exit this menu. However, the SETUP button will
still flash, the next menu can be selected for adjustment. To exit completely,
press one of the
DYN , EDIT , or PRESETS buttons twice.
4.9 External IP (Input) Gain
The
External IP Gain
menu allows the gain of any of the four external
inputs (on the rear of the console) to be adjusted through a range of –
∞
to
+18 dB.
Selecting Input and Gain: 1 Press the SETUP button found below the LC display. This will enter the setup
mode.
2 Use the PARAMETER encoder to scroll to the external input gain menu. The
LC display will read:
External IP Gain
EXT1 Gain: 0dB
3 The
EXT1
field will be flashing, and you may now use the PARAMETER
encoder to select
EXT1
,
EXT2
,
EXT3
or
EXT4
.
4 Once you have made your selection, press the u (right) arrow button to select
the Gain field and then use the
PARAMETER
encoder to adjust the Gain.
5 Pressing the SETUP button will exit this menu. However, the SETUP button will
still flash, the next menu can be selected for adjustment. To exit completely,
press one of the
DYN , EDIT , or PRESETS buttons twice.