Studer OnAir 500 Modulo, Operating Instructions Manual

Page: 56 / 118

OnAir 500 Digital Mixing Console
Menu Pages 4-13
Date printed: 10.08.05
4.10 Guest Headphones Level
The GUEST headphones output level is adjusted on the
Guest Headphones
menu page.
Adjusting the Guest Headphones Level:
1
Press the
SETUP
button found below the LC display. This will enter the setup
mode.
2 Use the PARAMETER encoder to scroll through the menu pages to locate the
Guest Headphones
menu. The SETUP button will flash upon selection.
3 Press the SETUP button to enter the guest headphones level mode. The LC
display will read:
Guest Headphones
Level: -10dB
Adjustment range is –
∞
to 0 dB, the default setting is –10 dB.
4 Pressing the SETUP button will exit this menu. However, the SETUP button will
still flash, the next menu can be selected for adjustment. To exit completely,
press one of the
DYN , EDIT , or PRESETS buttons twice.
4.11 HPF Frequency
The
HPF Frequency
menu allows selecting the cutoff frequency for the
high-pass filter located in the edit strip. Frequencies available are 80, 100,
150, 200 and 250 Hz.
Selecting the HPF Frequency: 1
Press the SETUP button found below the LC display. This will enter the setup
mode.
2
Use the
PARAMETER
encoder to scroll through the list of menu pages to locate
the
HPF Frequency
menu. The LC display will read:
Channel 1
HPF Freq: 100Hz
3 The frequency field will be flashing.
4 Press the SELECT button on the channel you want to adjust. The channel
number appears in the upper line of the LC display.
5 Once you have made your selection use the PARAMETER encoder to select
the HPF frequency you wish to use.
7 Pressing the SETUP button will exit this menu. However, the SETUP button will
still flash, the next menu can be selected for adjustment. To exit completely,
press one of the
DYN , EDIT , or PRESETS buttons twice.