38
S
7.11. Adjustments for Lights, Flat Panel, and VPA Suspensions
7.11.1
Spring Arm Height Adjustment for Lights and Flat Panel Spring Arms
1. Remove the covering cap using a small screwdriver. The height adjustment screw for the height stop is
beneath the cover cap (HB).
2. Put the spring arm in the horizontal position.
3. Adjust the height limitation using the adjustment screw (HB).
4. Re-attach the covering cap.
Note: Turning the height screw in the clockwise direction reduces the height and in a
counter clockwise direction increases the height.
7.11.2
Flat Cardanic Height Adjustment
1. Remove the casing shell (1).
2. Pull off the casing shell (1) in the direction of the arrow.
3. Rotate the casing shell (1) downwards as shown.
4. Bring the spring arm to a position whereby the hole nuts (2) are visible in the slot.
5. With a steel pin or equivalent (3) rotate the whole nut until the desired height limitation is achieved.
6.
Re-attach the casing shell (1).
Summary of Contents for Berchtold CHROMOPHARE
Page 1: ...CHROMOPHARE Surgical Lights Single and Combination Lights Service and Parts Manual ...
Page 2: ......
Page 64: ... 59 S ...
Page 65: ...60 S ...
