111
S
Disconnecting Can-bus at the suspension
c) Using the Service Menu on the keypad of the light you want to address, go to option 3, and press
the On/Off button to confirm.
Note: This will then send a signal on the can-bus to the light head distribution board and
all its LED modules changing their can-bus ID to match the keypad.
d) Exit the Service Menu. Turn on the light to make sure all modules received the command.
e) Repeat steps a) through d) for all light heads to be addressed.
6. F-Generation (Fxx8) – Keypad Control Service Menu
The F-Generation lights use the same Can-bus network as the E-series light heads and the operation of the
light is the same as E LED.
• Intensity, Color Temperature and GuideLite all function the same
• Spot size is adjusted from the handle
a) To access the service menu, press and hold the hidden Service Menu button until the Standby LED
blinks green and the first LED of the brightness display lights up green.
b) Use the Brighten (large bulb) button to select menu item 1, 2, 3 or 4. This is accomplished by the
lighting 1, 2, 3 or 4 LEDs of the brightness display and pressing the standby key to confirm.
c) One LED is the command to reset the keypad and light head. If the reset is successful, the keypad
Summary of Contents for Berchtold CHROMOPHARE
Page 1: ...CHROMOPHARE Surgical Lights Single and Combination Lights Service and Parts Manual ...
Page 2: ......
Page 64: ... 59 S ...
Page 65: ...60 S ...
