Stryker 3002 Maintenance Manual Download Page 50 | Manualshive

Page: 50 / 245

background image

Return To Table of Contents

50

3006-409-006 REV C

www.stryker.com

FOWLER MOTOR REMOVAL AND REPLACEMENT

Service Information

TOOLS REQUIRED:

•  3/8” Socket
•  7/16” Socket
•  3/8” Drive Ratchet

PROCEDURE:

WARNING

The head motor is not grounded and may be an electrical hazard. Use caution when working around motors.

CAUTION

Ensure the fowler is lowered all the way down.

1.  Using the CPR release, lower the Fowler to a flat (0 degrees) position.
2.  Unplug the bed power cord from the wall socket.
3.  Using a 3/8” socket, remove the two bolts at the foot end of the motion interrupt pan and remove the pan.
4.  Using a 7/16” socket, remove the four bolts holding the motor bracket to the bed frame as shown. Remove the

motor.

Note

Use caution when removing the motor to avoid having the coupler come off the ball screw shaft.

5. Unplug the head motor cables from the

bed and capacitor.

6. Prior to installing the new motor assembly,

apply a light coat of Syn-Tech grease
(p/n 3000-200-700) to the brake spring.

7. Reverse the above steps to install the

new motor assembly and reattach all
litter panels.

8. Test the bed for proper operation before

returning it to service.

Apply Syn-Tech grease

Bolts

Bolts

«
...
48
49
50
51
52
...
»

Summary of Contents for 3002






















































































































































































































































Reviews:

No comments

Related manuals for 3002

Brand: Eclipse Combustion Pages: 46

Brand: Bard Pages: 2

MicroVersaTrip Plus

Brand: GE Pages: 20

Brand: GE Pages: 252

Brand: Balanced Body Pages: 12

Brand: Eagle Pro Pages: 6

Brand: GE Pages: 10

ImageQuant LAS 4000

Brand: GE Pages: 86

Brand: GE Pages: 160

Brand: GE Pages: 134

Brand: FENDT Pages: 31

Brand: B&K Pages: 12

Brand: KaVo Pages: 49

Brand: Easson Pages: 33

Brand: Ultraflex Pages: 3

Brand: Tanaka Pages: 20

Brand: Tandem Pages: 80

Brand: Tanco Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands