manualshive.com logo in svg

Stryker 3002, Maintenance Manual

Share
Download
Stryker 3002 Maintenance Manual Download Page 30

Return To Table of Contents

30

3006-409-006 REV C

www.stryker.com

Problem / Failure

Recommended Action

No Gatch down motion.

A.  Check for 5VDC on TP4 on the CPU board; reference 

ground test point while pushing the fowler down 
button.
a.  If 5VDC is present, go to step B.
b.  If 5VDC is not present, replace CPU board.

B.  Check for 230VAC on connector GG, Pin 1 (white) and 

pin3 (red), of the CPU board while pressing Fowler 
down.
a.  If voltage is not present, replace the CPU board
b.  If 5VDC is present, check the capacitor and 

motor.

C.  Verify bed function and return to service.

No Gatch up motion.

A.  Check for 5VDC on TP 3 on the CPU board; reference 

ground test point while pushing the fowler up button.
a.  If 5VDC is present, go to step B.
b.  If 5VDC is not present, replace CPU board.

B.  Check for 230VAC on connector GG, Pin 1 (white) and 

pin 2 (black), of the CPU board while pressing Fowler 
up.
a.  If voltage is not present, replace the CPU board
b.  If 5VDC is present, check the capacitor and 

motor.

C.  Verify bed function and return to service.

No Fowler up motion.

A.  Check for 5VDC on TP 6 on the CPU board, reference 

ground test point while pushing the gatch up button.
a.  If 5VDC is present, go to step B.
b.  If 5VDC is not present, replace CPU board.

B.  Check for 120VAC on connector CC, pin 1 (black) and 

pin3 (white), of the CPU board while pressing gatch 
up.
a.  If voltage is not present, replace the CPU board
b.  If 5VDC is present, check the capacitor and 

motor.

C.  Verify bed function and return to service.

No Fowler down motion.

A.  Check for 5VDC on TP 5 on the CPU board, reference 

ground test point while pushing the gatch down 
button.
a.  If 5VDC is present, go to step B.
b.  If 5VDC is not present, replace CPU board.

B.  Check for 230VAC power on connector CC, pin 2 (red)  

and pin 3 (white), of the CPU board while pressing 
gatch down.
a.  If voltage is not present, replace the CPU board.
b.  If 5VDC is present, check the capacitor and 

motor.

C.  Verify bed function and return to service.

Troubleshooting Guide

Summary of Contents for 3002






















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands