manualshive.com logo in svg

Stryker 3002, Maintenance Manual

Share
Download
Stryker 3002 Maintenance Manual Download Page 17

Return To Table of Contents

www.stryker.com

3006-409-006 REV C

17

The electronic circuits in the 3002 S3 Bed are completely protected from static electricity damage only while the bed 
is assembled. It is extremely important that all service personnel always use adequate static protection when servicing 
the electronic systems of the 3002 S3 Bed. Whenever you are touching wires, you should be using static protection.

Static Protection Equipment

The necessary equipment for proper static protection is:

•  1 static wrist strap; 3M part number 2214 or equivalent,
•  1 grounding plug; 3M part number 61038 or equivalent,
•  1 test lead with a banana plug on one end and an alligator clip on the other; Smith part number N132B699 or 

equivalent.

CAUTION

All electronic service parts will be shipped in static shielding bags. Do not open the bags until you have completed steps 
2 and 3 of the following procedure. Do not place unprotected circuit boards on the floor. All circuit boards to be returned 
to Stryker Medical should be shipped in the static shielding bags the new boards were shipped in.

Static Protection Procedure

1.  Unplug the power cord from the wall receptacle.
2.  Insert the grounding plug into a properly grounded hospital grade wall receptacle. Plug the banana plug of the 

test lead into the receptacle on the grounding plug. Connect the alligator clip on the other end of the test lead to 
a ground point on the bed.

3.  Place the static control wrist strap on your wrist. Connect the alligator clip at the other end of the wrist strap cord 

to a ground point on the bed.

BED

GROUNDING DIAGRAM

Static Discharge Precautions

Summary of Contents for 3002






















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands