Stryker 3002 Maintenance Manual Download Page 37 | Manualshive

Page: 37 / 245

Stryker 3002 Maintenance Manual Download Page 37

Return To Table of Contents

www.stryker.com

3006-409-006 REV C

37

TOOLS REQUIRED:

•  5/16” Hex Allen Wrench
•  Torque Wrench
•  Bungee Cords
•  Loctite 242
•  Hammer
•  Punch
•  #2 Phillips Screwdriver

PROCEDURE:

1.  Raise the bed to the full upright position.
2.  Remove the two uni-pan cover clips (A) holding the uni-pans together.
3.  Unplug the bed power cord from the wall socket.
4.  Using a #2 Phillips screwdriver, remove the three screws holding both the head end and the foot end upper lift

covers. If desired, hold the covers out of the way by using bungee cords (or the equivalent) to secure them to the
litter top.

5. Using a 5/16” hex Allen wrench, remove the two bolts holding the brake pedal to the brake rod on the side which

needs to be changed.

6. Using a hammer and punch, remove the roll pins holding the brake shaft crank to the brake rod on both the head

and the foot end.

7. Push the brake rod through the frame until the brake pedal is clear. Remove the brake pedal.
8. Reverse the above steps to attach the new brake pedal.

Note

Use Loctite 242 when reinstalling the bolts and torque the bolts to 25 foot-pounds.

BRAKE PEDAL REPLACEMENT

Service Information

A

«
...
35
36
37
38
39
...
»

Summary of Contents for 3002






















































































































































































































































Reviews:

No comments