Stryker 3002 Maintenance Manual Download Page 19 | Manualshive

Page: 19 / 245

background image

Return To Table of Contents

www.stryker.com

3006-409-006 REV C

19

MAINTENANCE MENU SCREEN

The Maintenance Menu contains all of the non-regularly accessible features of the product. This menu provides
an interface to the user and/or service personnel in order to provide the ability to control and access maintenance
features.

Maintenance Menu Items

The following are menu items listed in the maintenance menu screen for a fully loaded bed:
1.  Calib. Scale (Calibrate Scale)
2.  TV Config. (TV Configuration)
3.  Scale Info. (Scale Info/Stats)
4.  Clear Scale Stats
5.  Error Log (View Error Log)
6.  Clear Errors (Clear Error Log)
7.  Scale Units (Lock Scale Units)
8.  About (About Product)
9.  Exit Menu (Exit Maintenance)

The following are menu items listed in the maintenance menu screen for a standard bed:
1.  TV Config. (TV Configuration)
2.  Error Log (View Error Log)
3.  Clear Errors (Clear Error Log)
4.  About (About Product)
5.  Exit Menu (Exit Maintenance)

The following are menu items listed in the maintenance menu screen for an

i

Bed:

1.  Calib. Scale (Calibrate Scale)
2.  TV Config. (TV Configuration)
3.  Scale Info. (Scale Info/Stats)
4.  Clear Scale Stats (only if you have scale option)
5.  Error Log (View Error Log)
6.  Clear Errors (Clear Error Log)
7.  Scale Units (Lock Scale Units)
8.  About (About Product)
9.  Exit Menu (Exit Maintenance)

•  Each of the menu items provides the operator with a different function.
•  Using the up and down menu buttons, you can scroll though the menu elements.
•  To select a menu item, scroll to the desired menu item using the Up and Down menu button. When the desired

feature is highlighted, press the Enter/Check button. Depending on the feature, the display will move into the
sequence for the feature selected.

Load Cell Check (Where applicable: for beds with a minimum of Scale or either kind of Bed Exit)

•  This feature automatically checks all four load cells to make sure they are working properly.
•  The purpose of this feature is to provide a self diagnostic of the load cells.
•  When maintenance is entered, a self-diagnostic feature should run and display results.
•  While the procedure is running, the following message is displayed: “Load Cell Check”.
•  Any load cell errors will be displayed as a message “Load Cell Error” and then, depending on the error, an HL,

HR, FL or FR will be displayed below the message. (Refer to the Error Handling Section).

• If no errors are present, then the maintenance menu will be displayed and menu items 1-9 above may be

accessed where applicable.

Maintenance Menu Guide

«
...
17
18
19
20
21
...
»

Summary of Contents for 3002






















































































































































































































































Reviews:

No comments

Related manuals for 3002

Brand: Calistair Pages: 44

Brand: GBC Pages: 8

Brand: KAPSCH Pages: 57

Brand: Labnet Pages: 5

Brand: B&K Pages: 12

Brand: Vatech Pages: 137

Brand: Vatech Pages: 68

Brand: Varytec Pages: 52

Brand: VDO Pages: 15

Brand: VDO Pages: 20

Brand: A.J.Antunes Pages: 24

Brand: B&G Pages: 2

Brand: GE Pages: 194

500 FleetBroadband

Brand: Sailor Pages: 20

MT765 Challenger

Brand: Fast Pages: 31

Brand: IMG STAGELINE Pages: 2

Brand: Klippan Pages: 8

Brand: Kewtech Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands