manualshive.com logo in svg

Stryker 3002, Maintenance Manual

Share
Download
Stryker 3002 Maintenance Manual Download Page 52

Return To Table of Contents

52

3006-409-006 REV C

www.stryker.com

TOOLS REQUIRED: 

•  Large Snap-Ring Pliers
•  3/8” Socket
•  3/8” Ratchet
•  Needle-Nose Pliers

PROCEDURE:

1.  Run the bed fully up. Unplug the bed power cord from the wall socket.
2.  Using a 3/8” socket, remove the two bolts holding the motion interrupt pan to the litter and remove the pan.
3.  Remove the fowler motor (

page 50

) for access to the ball screw assembly.

4.  Remove the fowler motor drive isolator and CPR decoupler (

page 51

).

5.  Using needle nose pliers, remove the cotter pin holding the clevis pin to the drive screw “wing” (A).
6.  Remove the clevis pin and slide the wing and tapered roller bearing off the ball screw.
7.  Using a 3/8” socket, underneath the litter, remove the screw holding the cam wire link (B) to the ball screw 

assembly.

8.  Using a 3/8” socket, remove the two bolts holding the ball screw support bracket (D) to the bottom of the litter and 

remove the bracket.

9.  Using large snap ring pliers, remove the snap ring holding the ball screw to the bracket (C).
10.  To prevent the ball nut from coming off the drive screw, cable tie both ends of the ball screw.
11.  Pull the ball screw toward the foot of the bed and remove the head end of the ball screw assembly from the 

support.

FOWLER MOTOR BALL SCREW ASSEMBLY REPLACEMENT

B

A

C

D

(standard length bed actuator 

assembly shown)

Service Information

Summary of Contents for 3002






















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands