Storz TECHNO PACK SP 100, Instruction Manual

Page: 84 / 104

82
6.2 保养与安全性检查
保养
预防性保养没有太多必要。但是定期保养能够及早发现故障
并可提高设备的使用寿命。制造商或当地经销商可为您提供
良好的机器保养服务。
安全性检查
除须遵守各国事故预防条例及对其检查间隔的不同规定外，
应由经拥有相关培训及实践经验的专业人员按照如下检查条
例，每年至少进行一次安全性检查。
外观目检：
1. 检查设备和附件是否存在功能上的机械损伤。
2. 检查各安全标识的完整性。
18/01
6.2 Maintenance and safety check
6 Maintenance
6.2 保养与安全性检查
6 维修保养
6.2 Maintenance and safety check
Maintenance
Preventive maintenance is not essential. Regular
maintenance can, however, contribute to identifying
potential problems before they become serious, thus
enhancing the instrument’s reliability and extending its
useful service life. Maintenance services can be obtained
from your local representative or from the manufacturer.
Safety check
Regardless of the accident prevention regulations or
testing intervals prescribed in different countries, the
following checks must be carried out on this device at
least once a year by persons who, due to their training,
knowledge, and practical experience, are able to properly
carry out such safety checks and who are not subject
to any instructions as far as such checking activities are
concerned.
Visual inspection:
1. Check the device and accessories for any mechanical
damage which may impair functionality.
2. Check that inscriptions relevant to safety are legible.