Storz TECHNO PACK SP 100, Instruction Manual

Page: 46 / 104

44
次级功能（长按 > 2 秒）
摄像头功能键 3
视频拍摄开 – 视频拍摄关 – 确
认文件名*
摄像头功能键 2
激活功能 “快门和积累模式”（在
曝光不足/曝光过度的测试间中增
加/减少曝光时间）。通过第一个
和第二个按键控制。
摄像头功能键 1
激光强度。通过第一个和第二个
按键控制。**
* 仅在相应设置中
** 仅在已连接激光器时
5.3 项目总览
接通并启动设备之后，项目总览就会出现在起始页上。
1
提示： 根据软件版本不同，软件的界面示意图可能
有所差异。
18/01
5.3 Project overview
5 Operating instructions
5.3 项目总览
5 操作说明
Secondary function (long pressure > 2 sec.)
Camera head
button 3
Video recording On –
Video recording Off –
Confirmation of file name*
Camera head
button 2
Activates the „Shutter and
Integration Mode“ functi-
on (reduces/increases the
shutter if the space being
examined is inadequately lit/
overlit). Control is via the first
and second button.
Camera head
button 1
Laser intensity.
Control is via the first and
second button. **
* Only with corresponding setting
** Only with laser connected
5.3 Project overview
The project overview appears after the device has been
switched on and started up on the Start page.
1 NOTE: The images of the software interfaces may
vary depending on the software version.