Still RX60-60, Original Instructions Manual

Page: 243 / 408

be unlocked. To do this, release the accel-
erator briefly and then operate the accelera-
tor again.
●
Switching on the truck in a hall
If the truck is switched on inside a hall, the
ceiling sensor system detects the hall ceil-
ing and reduces the driving speed to the
maximum speed that is set for halls.
Possible limitations for object recogni-
tion
●
If the truck moves under larger overhead
structures outdoors, e.g. a pedestrian
bridge, the ceiling sensor system may inter-
pret this overhead structure to be a hall ceil-
ing and reduce the maximum speed.
●
In rare cases, it may occur that the ceiling
sensor system does not recognize a ceiling
and does not then reduce the speed. This
can happen if the signals from the ceiling
sensor are insufficiently reflected due to the
ceiling geometry; for example, if there are
large window areas at a 45° angle.
In these cases, the sensitivity and the range of
the ceiling sensor system must be adjusted.
See the following section.
Changing the sensor settings
NOTE
The ceiling sensor system is supplied by
STILL with the following factory settings:
●
Sensitivity: High
●
Ceiling height: 24 m
–
Park the truck securely and switch it off.
Operating
4
Auxiliary equipment
231 56358042501 EN - - 11