Still RX60-60, Original Instructions Manual

Page: 328 / 408

DANGER
Risk of accident from the truck crashing!
Steering movements can cause the tail end to veer
off the loading bridge towards the edge. This may
cause the truck to crash.
–
Before driving across a loading bridge, ensure
that the loading bridge is properly attached and
secured.
–
Ensure that the transport vehicle onto which the
truck is to be driven has been sufficiently secured
against moving.
–
Maintain a safety distance from edges, loading
bridges, ramps, working platforms etc.
–
Drive slowly and carefully onto the transport vehi-
cle.
Inserting wedges
–
Secure the truck from rolling away by plac-
ing a wheel chock (1) in front of each front
wheel and behind each back wheel.
–
Park the truck securely.
CAUTION
Risk of damage to the battery male connector when
disconnecting!
If the battery male connector is disconnected while
the key switch is switched on under load, an arc will
be produced. The arc can damage the contacts and
considerably shorten the service life of the contacts.
–
Switch off the key switch.
–
Only disconnect the battery male connector while
the key switch is switched off.
–
Ensure that the key switch is switched off.
–
Disconnect the battery male connector.
Lashing down
CAUTION
Harnesses can rub against the seating and cause
damage!
–
Place a slip-resistant material between the har-
ness and the seating, e.g. rubber mats or foam.
7331_003-002

Operating
4
Transporting the truck
316 56358042501 EN - - 11