Still RX60-60, Original Instructions Manual

Page: 356 / 408

–
Set down the bottom plate upright in the
footwell.
–
Connect the connection assembly to the ac-
celerator pedal.
–
Position the bottom plate at the front.
–
Carefully guide the bottom plate down and
close.
–
Insert the rubber mat.
–
Close the bonnet.
Opening/closing the front right
cover
Opening the cover
WARNING
Risk of injury through crushing if the cover falls
down!
The cover is equipped with a gas spring that holds
the cover in the open position unless there is any
other load on it, e.g. heavy objects, strong winds or
other persons.
–
There must be no objects on the cover when you
open it.
–
Make sure that the cover is not being pushed
down by strong winds or other persons.
–
Release the quick release clamp (3) with a
1/4 revolution.
–
Swivel the cover (2) upwards.
The cover is held in the opened position by
the gas spring.
Closing the cover
WARNING
Risk of crushing between cover and frame edge!
If limbs or objects are between the cover and frame
edge when the cover is closed, they can be crushed.
–
Make sure when you close the cover that there is
nothing between the cover and the frame edge.
2
3
7341_003-007

Maintenance
5
Providing access to maintenance points
344 56358042501 EN - - 11