Still RX60-60, Original Instructions Manual

Page: 332 / 408

–
Adjust the length of the harnesses so that
the lifting eye (6) is vertically above the
truck's centre of gravity.
This ensures that the truck hangs level when
lifted.
–
Attach the lifting straps to the lifting eye and
insert the safety device (5).
CAUTION
Incorrectly fitted harnesses may damage attachment
parts!
Pressure from the harnesses can damage or destroy
attachment parts when the truck is lifted. If attach-
ment parts are in the way (e.g. lighting, rear window,
trademark emblem etc.), these must be removed be-
fore loading.
–
Secure harnesses in such a way that they do not
touch any attachment parts.
–
Check that harnesses cannot come into
contact with attachment parts.
Loading the truck
DANGER
If the raised truck swings in an uncon-
trolled manner, it may crush people.
There is a risk of fatal injury!
–
Never walk or stand underneath sus-
pended loads.
–
Do not allow the truck to bump into
anything whilst it is being lifted, or al-
low it to move in an uncontrolled man-
ner.
–
If necessary, hold the truck using
guide ropes.
–
Carefully lift the truck and set it down at the
intended location.
7321_003-013
5 6

Operating
4
Transporting the truck
320 56358042501 EN - - 11