Still RX60-60, Original Instructions Manual

Page: 86 / 408

Component Course of action
Coupling pin, tow coupling (variant)
Perform a visual inspection for deformation and
wear (for example, bent, torn, broken).
Check the securing bush in the counterweight for
integrity and to ensure that it is working correctly.
Check that the linchpin is present and working cor-
rectly (chain, rope, split pin).
Labelling, adhesive labels
Check for presence, integrity and legibility.
Replace damaged or missing adhesive labels in ac-
cordance with the section entitled "Labelling
points".
Driver's seat, seat belt Check the integrity and function.
Lighting, warning units Check the integrity and function.
Antistatic belt
Perform a visual inspection for integrity.
Ensure cleanliness.
The antistatic belt must be long enough to touch the
ground adequately.
Lift and tilt cylinders, tank, valve block, ho-
ses, pipes, connections
Perform a visual inspection for damage and leak-
ages.
Check the area under the truck for leaking consum-
ables.
Have damaged components replaced only by the
authorised service centre.
Wheels, tyres
Perform a visual inspection for wear and damage.
Make sure that only rims of the same type from the
same manufacturer are fitted.
In the event of uneven tyre wear, replace both
tyres.
Observe the safety regulations in the section enti-
tled "Tyres".
Axle
Make sure that no consumables are escaping from
the axle.
Exhaust air grille on the cover of the rear
weight
Perform a visual inspection for contamination or de-
posits.
Clean as required.
–
Do not use the truck if there is any damage
or defect.
–
Contact your authorised service centre.
Operating
4
Checks and tasks before daily use
74 56358042501 EN - - 11