Still RX60-60, Original Instructions Manual

Page: 205 / 408

Plug connectors on the lift mast
–
Before fitting the attachment, depressurise
the hydraulic system; see the chapter enti-
tled "Depressurising the hydraulic system".
CAUTION
Risk of damage to components!
Open connections on the plug connectors (1) can be-
come dirty. Dirt can enter the hydraulic system. The
plug connectors can become stiff.
–
Once the attachment has been disassembled,
seal the plug connectors using the protective
caps.
Mounting attachments
Only competent persons are permitted to
mount and connect the energy supply to the
attachment.
–
Observe the information provided by the
manufacturer and supplier or sub-supplier
of the attachment when doing so.
NOTE
Please observe the definition of the following
responsible person: "competent person".
–
Switch off the truck.
–
Install the attachment.
–
Switch on the truck.
–
Check and ensure that all functions of the
installed attachment are working properly.
Load capacity with attachment
The permissible load capacity of the attach-
ment and the permissible load (load capacity
and load moment) of the truck must not be ex-
ceeded by the combination of the attachment
and the payload. Comply with the specifica-
tions of the manufacturer and supplier of the
attachment.
–
Observe the residual load capacity rating
plate; see the chapter entitled "Picking up a
load using attachments".
6219_003-056
1

Operating
4
Attachments
193 56358042501 EN - - 11