Still RX60-35/600, Original Instructions Manual

Page: 110 / 470

4
Operation
Checks and tasks before daily use
NOTE
Accurate zero adjustment is only possible
within the first lifting stage of the lift mast.
When carrying out the zero adjustment, do not
raise the fork more than 800 mm above the
ground.
NOTE
The way in which the lifting system is operated
depends on the operating devices included in
the truck's equipment; see the chapter entitled
"Lifting system operating devices".
– Set lift mast to vertical.
– Raise the fork to a height of 300-800 mm.
6210_003-071_V2
2
1
– Press the Softkey (1).
The zero adjustment of the load measurement
is switched on. The symbol is displayed.
The message
LOWER FORKS
appears on the
display.
NOTE
During the following process, the fork carriage
must be lowered slightly and then stopped
abruptly. While doing so, the fork must
not touch the ground, otherwise the zero
adjustment will not be accurate. To stop
the lowering procedure quickly, release the
operating device for lowering so that it jumps
into the zero position.
– Lower the fork carriage slightly and release
the operating device.
When the zero adjustment has been carried
out correctly, the value "0 kg" appears on the
display.
– The zero adjustment of the load measure-
ment is completed. The symbol (2) is
displayed.
96 171533 EN - 02/2019 - 19