Still RX60-35/600, Original Instructions Manual

Page: 318 / 470

4
Operation
Connecting and disconnecting the battery male connector
Disconnecting the battery male
connector
CAUTION
Risk of component damage!
If you remove the battery male connector when the
key switch is switched on (under load), an arc will be
produced. This can lead to erosion at the contacts,
which considerably shortens their service life.
– Switch off the key switch before the battery male
connector is disconnected.
– Only disconnect the battery male connector with
the key switch switched on in an emergency.
– Open the battery cover.
1
5060_003-051
– Disconnect the battery male connector (1)
by pulling in the direction of the arrow at the
plug connection.
– Place the battery male connector on the
battery.
CAUTION
There is a risk of short circuit if the
cables are damaged.
Position the battery cable on the
battery in such a way that it cannot be
crushed when removing or inserting
the battery or when closing the battery
cover.
– Check the connecting cable for
damage.
– Ensure that the battery cable does
not come into contact with the
battery cover.
– Close the battery cover.
304 171533 EN - 02/2019 - 19