Still RX60-35/600, Original Instructions Manual

Page: 221 / 470

Operation
4
Attachments
1
F1 F1
F2 F2
1
1
F1
F2
1
1
+ F
2
2
2
2
2
Procedure for mini-lever control, fingertip
operation and Joystick 4Plus operation
NOTE
In trucks with the "FleetManager" or "access
authorisation with PIN code" equipment va-
riants, access authorisation must be enabled.
– Switch on the key switch.
– Lower the fork carriage.
– Switch on the hazard warning system
(variant).
NOTE
Press the button for switching on the hazard
warning system even if the truck is not equip-
ped with a hazard warning system. Switching
on the hazard warning system prevents the
electrical system from being switched off,
even if the key switch is subsequently swit-
ched off.
– Switch off the key switch.
The message
KEY SWITCH
appears in the
display.
– Actuate the operating lever (1) several
times in the direction of the arrow until the
end position is reached.
The hydraulic circuits of the first four hydraulic
functions are depressurised.
– Press and hold the 5. Funktion (2) function
key.
– While holding down the button, actuate the
relevant operating lever (1) several times
in the different directions of the arrows until
the end position is reached.
The hydraulic circuit of the 5th hydraulic
function is depressurised. The connections
on the lift mast are depressurised.
– Release the function key (2).
171533 EN - 02/2019 - 19 207