Still RX60-35/600, Original Instructions Manual

Page: 217 / 470

Operation
4
Attachments
DANGER
There is risk to life caused by a falling load!
Attachments that hold the load by exerting pressure
on it (e.g. clamps) must be controlled additionally by
a second operating function (lock) that is actuated
to prevent an unintentional release of the load.
If such an attachment is retrofitted, a second opera-
ting function for actuation must also be retrofitted.
– Make sure that the additional clamp locking
mechanism function is available.
DANGER
There is risk to life caused by a falling load!
During installation of a clamp with integral sideshift,
ensure that the clamp does not open when the
sideshift is actuated.
– Notify your authorised service centre before
installation.
– Never grab or climb on moving parts of the truck.
7090_900-001
Hydraulic connection
– Before installing the attachment, release
the pressure from the hydraulic system.
CAUTION
Risk of damage to components!
Open connections of plug connectors can become
dirty. The plug connectors can become stiff and dirt
can enter the hydraulic system.
– Once the attachment has been disassembled,
attach the protective caps to the plug connectors.
Mounting attachments
Mounting an attachment and connecting
the energy supply for an attachment must
only be performed by competent persons in
accordance with the information provided
by the manufacturer and supplier of the
attachment. After each installation, the
attachment must be checked for correct
function prior to initial commissioning.
NOTE
Please observe the definition of the following
responsible person: "competent person".
171533 EN - 02/2019 - 19 203