Still RX60-35/600 Original Instructions Manual Download Page 171

Page: 171 / 470

Operation

Driving

5060_00

-007

Steering

DANGER

If the hydraulics fail, there is a risk of accident as the

steering characteristics have changed.
– Do not operate the truck if it has a defective

steering system.

– Steer the truck by turning the steering wheel

(1) accordingly.

Turning the steering wheel in the direction of

arrow (A) steers the truck in drive direction (A).
Turning the steering wheel in the direction of

arrow (B) steers the truck in drive direction (B).
For turning radius information, see ⇒ Chap-

ter "Technical data", P. 419.

171533 EN - 02/2019 - 19

157

Summary of Contents for RX60-35/600























































































































































































































































































































































































































































































Search results

Summary of Contents for RX60-35/600

Reviews:

Related manuals for RX60-35/600

Brands by name

Popular brands

Still RX60-35/600, Original Instructions Manual

Search results

Summary of Contents for RX60-35/600

Reviews:

Related manuals for RX60-35/600

Brands by name

Popular brands