Operation
4
Driving
Error indication
Effect
Remedy
Display and operating unit:
Symbol: "Temperature"
Display:
PARKING BRAKE
Error number:
X6502
Application of the parking brake
is delayed.
The system switches off in the
event of over-temperature.
The error message flashes
every 30 seconds for five
seconds.
Allow the parking brake to cool
down. If the warning appears
again, notify the authorised
service centre
Display and operating unit:
Symbol: "Parking brake
malfunction"
Display:
PARKING BRAKE
Error number:
X6510
Malfunction in the parking
brake.
The drive unit remains active as
long as the contactor is closed.
Creep mode is possible once
the parking brake has been
released.
The error message flashes
every 30 seconds for five
seconds.
Try again to apply the parking
brake via the push button (1).
If this solution does not work,
park the truck safely and notify
the authorised service centre.
Apply the parking brake
manually if necessary. See the
chapter entitled "Emergency
operation of the electric parking
brake".
.
Actuating a faulty electric parking brake
6210_00
3
-050_V4
2
1
If the electric parking brake is faulty, the LED
(2) in the push button (1) will flash and the
message
APPLY HANDBRAKE!
will appear
on the display and operating unit. A possible
cause of the malfunction is that the parking
brake cannot determine whether the truck is
stationary or still in motion. The brake can be
then be applied via the push button (1). The
following section describes how to actuate the
parking brake when it is faulty:
Actuating a faulty parking brake when the
truck is stationary
Apply the parking brake:
– Press and hold the push button (1) for at
least five seconds and then release the
push button.
The parking brake will make a noise when it is
applied. After the push button is released, the
parking brake will not make any further noise;
if you hear the parking brake release again it
means that the push button was pressed for
less than five seconds. In this case, press the
push button again to apply the parking brake
again. Repeat this process up to four times if
necessary.
Releasing the parking brake:
171533 EN - 02/2019 - 19
153
Summary of Contents for RX60-35/600
