Still RX60-35/600, Original Instructions Manual

Page: 143 / 470

Operation
4
Driving
Maximum climbing capability
Maximum climbing capability [%]
Model
Type
With load Without load
With battery
carrier
RX60-35/600 6367 16.9 26.8
RX60-40 6367 15.5 25.9
RX60-40/600 6368 15.5 25.5
RX60-45 6328 14.3 24.6
RX60-45/600 6369 14.3 24.1
RX60-50 6329 13.2 23.4
RX60-50/600 6330 12.6 21.4
10.0
The ascending and descending gradients
must not exceed the gradients listed above
and must have a rough surface.
Smooth and gradual transitions at the top and
bottom of the gradient should prevent the load
from falling to the ground or the truck being
damaged.
Warning in the event that components
protrude beyond the truck contour
Trucks are often required to drive through very
narrow or very low spaces such as aisles or
containers. The dimensions of the trucks are
designed for this purpose. However, movable
components may protrude beyond the truck
contour and be damaged or torn off. Examples
of these components are:
• An unfolded roof panel in the driver's cab
• Open cab doors
Condition of the roadways
Roadways must be sufficiently firm, level and
free from dirt and fallen objects.
Drainage channels, level crossings and
similar obstacles must be evened out and,
if necessary, ramps must be provided so that
trucks can drive over these obstacles with as
few bumps as possible.
Note the load capacity of manhole covers,
drain covers etc.
171533 EN - 02/2019 - 19 129