Still RX60-35/600, Original Instructions Manual

Page: 114 / 470

4
Operation
Switching on
Once the key switch has been switched on,
the input menu for the driver PIN appears
on the display and operating unit screen. All
of the truck's functions (driving, hydraulics,
additional electrical installations and the
display and operating unit displays) are
blocked. The function of the hazard warning
system (variant) is guaranteed. Enter the five-
digit driver PIN (possible entries from 00000 to
99999) to enable the blocked functions. Once
the correct driver PIN has been entered, the
standard displays are shown. All of the truck
functions are available.
The access authorisation can be configured
in such a way that the driver PIN has to be
re-entered each time the driver steps off the
truck, in order for the truck to be operated
again.
– Contact the authorised service centre on
this matter.
The first driver PIN is preset to "11111" at the
factory. All others are preset to "0xFFF" but
have no function as the highest valid driver
PIN is "99999". Persons with the appropriate
access authorisation, e.g. fleet managers, can
change the driver PINs in the corresponding
menu.
NOTE
When first commissioning the truck, we re-
commend you change the access authorisa-
tion set at the factory. This is the only way to
guarantee that the driver PIN is only known to
persons with corresponding access authori-
sation.
The driver PINs are stored in the truck control
unit. These are still available if the display
and operating unit has been changed. The
authorised service centre can use a diagnostic
device to read out the driver PIN and, if
necessary, restore the factory default driver
PIN.
100 171533 EN - 02/2019 - 19