Still FM-X 10 N, Original Instructions Manual

Page: 213 / 380

NOTE
During free lift, the difference between the ref-
erence height and the target height is shown
on the display as the "lift height remaining until
target (target difference)" (6). The display
does not show the difference between the cur-
rent lift height and target height until after the
reference switch has been passed. The selec-
tion (level and area) can be cancelled using
the "DEL" button.
Example: Placing into stock in fully au-
tomatic mode
NOTE
Placing into stock can only be selected if valid
heights were assigned to the levels during the
teach-in process. Levels that are invalid or
that have not had a height assigned to them
are not activated in automatic mode. All pro-
grammable heights are set at the factory to
"5500 mm". Automatic mode can be interrup-
ted at any time using the "MAN" button!
–
After entering the target level (e.g. A1),
press the button for placing into stock (1).
The symbol for placing into stock (3) and
"auto" for automatic operation (4) appear in
the assistant (2). The display (5) changes
from the target height to the distance to the
target (target difference).
CAUTION
If the placing into stock button (1) is not pressed, all
hydraulic functions are available without restriction (=
manual operation)!
Pay attention to the symbols in the display!
–
After entering the target level (e.g. A1),
press the button for placing into stock (1).
The symbol for placing into stock (3) and
"auto" for automatic operation (4) appear in
the assistant (2). The display (5) changes
from the target height to the distance to the
target (target difference).
1
2 3 4 5

Operating
4
Lift height preselector / easy Target (variant)
201 50988078001 EN - 11/2021 - 10