Still FM-X 10 N Page 224 Original Instructions Manual Download

Page: 224 / 380

Cab (variant)

General information about the

cab

Depending on the area of application, the

truck can be equipped with a weather protec-

tion cab or a cold store cab.

Operating devices (variants)

The operating devices for the hydraulic func-

tions and driving are positioned and operated

in the same way as those on the basic truck.
Possible equipment variants include:

●

Screen heating

●

Washer system

●

Heating system

●

Fan heater

●

Intercom system

●

Working spotlight

●

Interior lighting

Opening the cab door

DANGER

Risk of fatal injury as a result of driving with the cab

door open!
The driver can be injured if he does not keep his en-

tire body within the protective cab, or if he falls off the

truck.

–

Always close the cab door before driving off, and

keep it closed when driving.

Operating

Cab (variant)

212

50988078001 EN - 11/2021 - 10

Summary of Contents for FM-X 10 N





























































































































































































































































































































































































Search results

Summary of Contents for FM-X 10 N

Reviews:

Related manuals for FM-X 10 N

Brands by name

Popular brands

Still FM-X 10 N, Original Instructions Manual

Search results

Summary of Contents for FM-X 10 N

Reviews:

Related manuals for FM-X 10 N

Brands by name

Popular brands