Still FM-X 10 N, Original Instructions Manual

Page: 214 / 380

–
Activate the lift function (displayed by the
assistant). The selected height plus the pal-
let free lift height is reached and the auto-
matic stop is performed (6). The display (5)
shows a distance to the target ≤ 6 mm.
–
Drive up to the racking (7).
–
Activate the LS shifting function (shown by
the assistant) and push the pallet onto the
shelf (8).
–
Activate the lowering function (shown by the
assistant). The forks are lowered by the pal-
let free lift (9) height.
–
Activate the DS shifting function and retract
the reach carriage completely (shown by
the assistant) (10).
The automatic routine is complete. All func-
tions are available again (= manual operation).
–
Back the truck away (11).
Example: Removing from stock in fully
automatic mode
NOTE
Removing from stock can only be selected if
valid heights were assigned to the levels dur-
ing the teach-in process. Levels that are inva-
lid or that have not had a height assigned to
them are not activated in automatic mode. All
programmable heights are set at the factory to
"5500 mm". Automatic mode can be interrup-
ted at any time using the "MAN" button!
–
After entering the target level (e.g. A2),
press the button for removing from stock
(1). The symbol for removing from stock (3)
and "auto" for automatic operation (4) ap-
pear in the assistant (2). The display (5)
changes from the target height to the dis-
tance to the target (target difference).

1
3 4 5 2

Operating
4
Lift height preselector / easy Target (variant)
202 50988078001 EN - 11/2021 - 10