Still FM-X 10 N, Original Instructions Manual

Page: 22 / 380

Using the truck
Commissioning
Commissioning is the initial intended use of
the truck.
The necessary steps for the commissioning
vary depending on the model and equipment
of the truck. These steps require preparatory
work and adjustment work that cannot be per-
formed by the operating company. See also
the chapter entitled "Definition of responsible
persons".
–
To commission the truck, contact the au-
thorised service centre.
Proper usage
The truck described in these operating instruc-
tions is suitable for lifting, transporting and
stacking loads.
The truck may only be used for its proper pur-
pose as set out and described in these operat-
ing instructions.
If the truck is to be used for purposes other
than those specified in the operating instruc-
tions, the approval of the manufacturer and, if
applicable, the relevant regulatory authorities
must be obtained beforehand to prevent haz-
ards.
The maximum load to be lifted is specified on
the capacity rating plate (load diagram) and
must not be exceeded; see also the chapter
entitled "Before picking up a load".
Intended use of the lithium-ion
battery (variant)
The lithium-ion battery must only be operated
in accordance with these operating instruc-
tions and the manufacturer's operating instruc-
tions for the battery.
Only lithium-ion batteries approved by STILL
for use with this truck may be used. The di-
mensions of the battery must precisely corre-
spond to the dimensions of the battery frame
Foreword
1
Using the truck
10 50988078001 EN - 11/2021 - 10