Still FM-X 10 N, Original Instructions Manual

Page: 272 / 380

Actuating the battery lock
Before the release lever for the battery lock
can be pulled, the battery lock must be re-
leased. The battery lock is released via the
"Retract reach carriage" operating function on
the joystick 4Plus or the corresponding finger-
tip switch.
The battery lock is only released if the truck is
stationary.
Releasing the battery lock
–
Bring the truck to a standstill.
–
Press and hold the foot switch
–
Use the actuating lever (joystick or fingertip
switch) to retract the reach carriage to the
drive side until the reach carriage stops.
–
Continue to actuate the actuating lever. Af-
ter 5 seconds the "lock"(1) symbol appears
in the display.
–
Release the actuating lever. After approx. 2
seconds, the (2) arrow shows that the reach
carriage can be retracted further into the
end position. If the end position is not
reached within 2 minutes, or if the accelera-
tor pedal is pressed, the operation is can-
celled. The "lock" symbol is hidden again.
–
Retract the reach carriage to the end posi-
tion to unlock the battery.
–
Pull the release lever (3) for the battery lock
upwards. The battery is unlocked.
When the battery is unlocked:
●
An acoustic warning signal is heard
●
The "creep speed"(4) symbol is displayed
●
The driving speed is limited to 1.6 km/h
●
The hydraulic functions are restricted
–
Eject the battery together with the reach
carriage to the load side.
Locking the battery
–
Press and hold the foot switch
–
Use the actuating lever (joystick or fingertip
switch) to retract the reach carriage
4
2
3
1

Operating
4
Replacing and transporting the battery
260 50988078001 EN - 11/2021 - 10