Still FM-X 10 N, Original Instructions Manual

Page: 136 / 380

Lifting
Lifting system variants
The movement of the fork carriage and the lift
mast heavily depends on the following equip-
ment:
●
The lift mast fitted on the truck; see the
chapter entitled "Lift mast versions"
●
The operating device that is used to control
the hydraulic functions; see the chapter en-
titled "Lifting system operating devices"
Regardless of the equipment variants of the
truck, the basic specifications and procedures
must be observed; see the chapter entitled
"Safety regulations for working with loads".
Lift mast versions
DANGER
Risk of accident due to collision of the lift mast or
load with low ceilings or entrances.
–
Note that the inner lift mast or load may be higher
than the fork carriage.
–
Observe the heights of ceilings and entrances.
One of the following lift masts may be installed
in the truck:
Telescopic lift mast
During lifting, the lift mast rises above the out-
er lift cylinders, bringing the fork carriage with
it via the chains (fork carriage rises twice as
fast as the inner lift mast). The top edge (1) of
the inner lift mast can therefore be higher than
the fork carriage.
1

Operating
4
Lifting
124 50988078001 EN - 11/2021 - 10