Still FM-X 10 N, Original Instructions Manual

Page: 281 / 380

Positioning the truck correctly in relation
to the battery rack
CAUTION
Before replacing the battery, ensure that the rollers
for the battery transport in the battery rack are
aligned with the rollers in the truck. Failure to do so
could cause damage to the battery rack rollers and
locking mechanism.
The truck must be placed in such a position
relative to the battery rack that the transition of
the battery between the truck and the battery
rack can be performed without mechanical re-
sistance.
–
Make sure that the transfer height of the
battery rack is correctly adjusted to that of
the truck, refer to the chapter entitled "Bat-
tery change frame/Adjusting the transfer
height".
–
Position the truck and battery rack parallel
to each other.
–
Position the truck and the battery rack so
that the roller channels of the truck and bat-
tery rack are exactly aligned with each oth-
er.
Extending the battery
The battery sits in a frame. To replace the bat-
tery, this frame is extended in the load direc-
tion together with the reach carriage. Before
the reach carriage is extended, the battery
lock lever must be actuated. When the reach
carriage is fully retracted, the battery frame is
mechanically locked again.
–
Retract the reach carriage fully.
–
Apply the parking brake.
–
Release the battery lock (refer to the chap-
ter entitled "Actuating the battery lock").
–
Press the foot switch.
Operating
4
Replacing and transporting the battery
269 50988078001 EN - 11/2021 - 10