Still FM-X 10 N, Original Instructions Manual

Page: 321 / 380

At operating hours
1000 2000 4000 5000 7000
8000 10000 11000 13000 14000
Carried
out
 
Check the lighting, indicator lights, instruments and seat contact switch
Converter
Use air to blast dust from the surfaces
Remove dirt and dust from the heat sinks
Check the fans for correct function and for damage, and clean
Lead acid battery and accessories
Check the battery for damage and check the acid density; follow the manufacturer's
maintenance instructions
Check the battery male connector and cables for damage
Perform insulation testing
Measure the tray for short circuits
Lithium-ion battery and accessories
NOTE: Lithium-ion batteries are charged using high currents. Minor damage to the
contact surfaces can therefore damage the battery plug. Replace the battery male
connector in good time.
Check the battery for damage; follow the manufacturer's maintenance instructions
Check the battery male connector, contacts and cable for damage; replace if neces-
sary
Check the battery male connector, contacts and cable on the battery charger for
damage; replace if necessary
Perform insulation testing
Hydraulic system
Check the condition of the hydraulic system, check that it is working correctly, check
for damage and check for leak tightness
Check the hydraulic pump for leak tightness
Check the hydraulic oil level
Check the oil filter (visual inspection; replace if contaminated)
Check the oil tank for leak tightness
Clean the breather filter and replace if necessary
Lift mast
Visual inspection of the lift mast crossmembers (lift masts with an overall height >
3700 mm only). Test point valid for trucks built between 02/2019 and 06/2020, see
Service Information 512020010.
Maintenance
5
General maintenance information
309 50988078001 EN - 11/2021 - 10