Still FM-X 10 N, Original Instructions Manual

Page: 262 / 380

battery. The two displays have different scale
gradations and are therefore not identical.
Reading the display-operating unit of
the truck
All segments (1) of the display (100%) light up
a few moments after a fully charged battery is
connected. As the capacity decreases, the
segments go out one after the other. If the dis-
charge level of 25% residual capacity is
reached, only the last segment continues to
flash. An optional hydraulic limitation or driving
limitation can be activated by the operating
company or your authorised service centre.
Reading the display of the lithium-ion
battery
The battery indicator is located on the side of
the battery tray. In addition to the display-op-
erating unit, this too shows the charging status
of the lithium-ion battery. Warnings are only is-
sued on the battery indicator.
–
If you have any questions, contact your au-
thorised service centre.
Charging state LEDs
When the battery is connected to the truck
and the truck is switched on, the charge state
LEDs (3) display the charge state in 10% in-
crements. The charge state LEDs can light up
green and red.
●
A charge state of 0% to 10% is indicated by
a red bar.
If this bar flashes, the charge state is < 2%.
The truck can no longer be moved.
●
A charge state of > 10% to 30% is indicated
by yellow bars
●
A charge state of > 30% to 100% is indica-
ted by green bars
When charging, the charging state LEDs (3)
light up green as a chaser light.
Service LED
The service LED (1) lights up red if the battery
function is significantly restricted or if opera-
tion is not possible.
1

1 2
3
Service LED (red)
Temperature LED (yellow/red)
Charge state LEDs (red/green)
1
2
3

Operating
4
Handling the lithium-ion battery (variant)
250 50988078001 EN - 11/2021 - 10