Still FM-X 10 N, Original Instructions Manual

Page: 90 / 380

WARNING
Risk of injury when jumping out of the truck!
If the driver jumps out the truck while it is moving, he
or she could fall under the truck or be crushed by an
obstacle.
If the driver's clothing or jewellery (watch, ring etc.)
become stuck on components, this can lead to seri-
ous injuries, e.g. from falling, loss of fingers.
–
Only climb into or out of the truck when the truck
is at a standstill.
–
Do not jump out of the truck.
–
Do not wear jewellery at work.
–
Do not wear loose-fitting workwear.
CAUTION
Components may become damaged through incor-
rect use!
Truck components, such as the driver's seat, steer-
ing wheel, parking brake lever etc., are not designed
to be used for climbing in and out of the truck and
may be damaged due to misuse.
–
Only use the fittings specifically designed for the
purpose of climbing into and out of the truck.
The truck must be at a standstill when climb-
ing into or out of the truck. To assist with
climbing into and out of the truck, the footwell
must be used as a step (4) and the handle (1)
must be used for support. The post of the
overhead guard (2) can also be used for sup-
port.
Always climb into the truck forwards:
–
Grip the handle (1) with your left hand and
hold on.
–
Put your left foot on the step (4).
–
Climb into the truck with your right foot first
and sit down on the driver's seat (3).
Always climb out of the truck backwards:
–
Grip the handle (1) with your left hand and
hold on.
–
Stand up from the driver's seat and place
your left foot on the step (4).
–
Climb out of the truck right foot first.
1
2
3
4

Operating
4
Checks and tasks before daily use
78 50988078001 EN - 11/2021 - 10