76
MS 460, MS 460 C
:
Remove front handle mounting
screws from underside of
machine.
– Remove the front handle.
On machines heated handles,
disconnect the heating element,
VA
138RA207
b
14.4
– Disconnect connector between
generator and rear handle
heating element,
b
7.5
– On machines with carburetor
heating, disconnect connector of
wire to heating element,
b
7.5
– On machines heated handles,
remove the heater switch,
b
14.2
:
Disconnect short circuit wire (1)
and ground wire (2) from the
contact springs.
VA
176RA304
1
2
:
Ease the plug (arrow) out of the
annular buffer at the starter side.
VA
176RA305
:
Take the screw (arrow) out of the
buffer.
– Remove the inner side plate,
b
5.4.2
VA
176RA306
– Remove the chain catcher,
b
5.2
:
Take the plugs (arrows) out of the
annular buffers at the clutch side.
VA
176RA307
:
Take out the annular buffer
mounting screws (arrows).
VA
176RA308
:
Pull the tank housing forward and
push the manifold flange out of
the tank housing at the same
time.
VA
176RA309
:
Pull the impulse hose off the
nipple.
VA
176RA102