48
MS 460, MS 460 C
– Remove the ignition module,
b
7.1.2
:
Pull the grommet (1) off the high
voltage output (2).
:
Unscrew the ignition lead (3) from
the contact pin and pull it out of
VA
176RA157
3
1
2
4
the high voltage output.
:
Remove the grommet and
insulating tube (4) from the
ignition lead.
:
Pull the cover off the spark plug
boot.
VA
176RA158
:
Use suitable pliers to pull the leg
spring out of the spark plug boot.
– Unhook the leg spring from the
ignition lead.
– Pull the boot off the ignition lead.
VA
176RA159
– Cut new ignition lead to a length
of 150 mm.
– Coat end of ignition lead (about
20 mm) with oil.
– Fit the spark plug boot over the
ignition lead.
– Use suitable pliers to grip the end
of the ignition lead inside the
spark plug boot and pull it out.
– Use a pointed tool to pierce the
center of the ignition lead’s
insulation, about 15 mm from the
end of the lead.
:
Pinch the hook of the leg spring
into the center of the lead (arrow).
VA
176RA160
:
Pull the lead back into the spark
plug boot so that the leg spring
locates properly inside it.
– Push the cover over the spark
plug boot.
VA
176RA161
7.2
Spark Plug Boot/
Ignition Lead