19
MS 460, MS 460 C
Troubleshooting –
b
4.1.
– Remove the chain sprocket
cover, bar and chain,
b
5.1
– Remove the clutch drum or chain
sprocket,
b
5.3
:
Take screw (1) out of inner side
plate (2).
– Remove the side plate.
– Engage the chain brake by
pushing the hand guard away
from the front handle.
VA
138RA004
1
2
:
Take out the screws (arrows).
– Remove the cover.
– Relieve tension of brake spring
by pushing hand guard forward.
VA
176RA026
:
Carefully ease the brake
spring (1) off the anchor pin and
take it off the bell crank (2).
VA
176RA027
1
2
:
Take out the screw (arrow).
VA
176RA028
:
Pry the brake band out of the
crankcase.
VA
176RA029
:
Remove the brake band (1) from
the lugs on the crankcase.
:
Disconnect the brake band from
the bell crank (2).
VA
176RA030
1
2
Install a new brake band if there are
noticeable signs of wear (large
areas on inside diameter and/or
parts of outside diameter) and its
remaining thickness is less than
0.6 mm.
VA
176RA031
5.4.2
Removing