62
MS 460, MS 460 C
– Remove the filter base,
b
12.1
:
Remove the screw (arrow) from
the underside of the rear handle.
– Remove the handle molding
upwards.
VA
176RA212
– Move Master Control lever to
“RUN” position.
:
Take out the interlock lever.
VA
176RA213
:
Pull the throttle rod out of the
throttle trigger.
VA
138RA122
:
Use a 5 mm drift to drive out the
dowel pin (1).
:
Take out the throttle trigger (2)
with torsion spring (3).
VA
176RA215
1
2
3
:
Remove the torsion spring from
the throttle trigger.
VA
176RA216
The torsion spring must be fitted
under the interlock lever and locate
in the notch (arrow).
VA
138RA128
Machines with heated handles
:
The wires from the heating
element must be under the
interlock lever (arrow) and locate
in the channel.
VA
176RA217
:
Press the interlock lever (1)
down.
:
Pull the throttle trigger (2) up and
move the Master Control lever (3)
to “CHOKE“ position.
VA
176RA218
2
1
3
:
Fit the handle molding, making
sure it engages behind the lugs
as shown.
VA
176RA219
10.2
Throttle Trigger/Interlock
Lever