89
MS 460, MS 460 C
– Remove the ignition module,
b
7.1.2
– Remove the flywheel,
b
7.3
:
Separate the pin and socket
connector (1).
176RA099
1
VA
There are two connectors on
generator WVH, disconnect both.
:
Take out the screws (arrows).
– Remove the generator.
VA
176RA238
VA
:
Inspect the generator and poles
for cracks or other damage. If
damage is found, replace the
generator.
VA
176RA239
:
Inspect the magnet ring (arrow) in
the flywheel for cracks or other
damage. If damage is found,
replace the flywheel.
Reassemble in the reverse
sequence.
VA
176RA240
:
Place the generator in position
with the connecting wire (1)
facing the crankcase.
:
Connecting wire must locate in
the crankcase recess (2).
– Coat screw threads with
176RA241
VA
1
2
Loctite 242,
b
16.
– Tighten down the screws firmly,
b
3.5
14.5
Generator